Union Hall: (209)524-5171
  JATC Apprenticeship: (209)579-5417
LOCAL 684
684 Tool Lists

Tools

Section 2.16 

Journeymen shall provide themselves with the following tools:

TOOL LIST

Tool Box

Stakon Pliers

Pencil

Wire Strippers

Tape Measure (Up to 25')

Scratch Awl or Center Punch

Knife

Plum Bob

Pliers – Diagonal

Combination Square

Screw Drivers (not over 10” blade)

Channel Locks (2 pr)

Pliers – Side Cutters

Continuity Tester,

Voltage Tester (600 volts)

or combination multi-meter tester

1-12” Chain Tongs and/or

1-10” and 1-14” Pipe Wrench

Hammer

Flashlight

Crescent Wrench-any 2 (6”-8”-10”)

Spin Tights ¼” – ½”

EMT Condut Reamer 1/2" - 1"

Half Round File

Level – small

Tap Wrench, Handle

Needle-Nose Pliers

Allen Wrenches (up to ½”)

Protractor

Keyhole Saw

Tin Snips (1 pr)

Tool Belt and Pouch

1 National Electric Code (current issue)

Personal keyed lock for use with lock out/tag out equipment

3/8” – ¾” Speed Wrenches

S & C Installer Tool List

Section 3:11.  Employee Tools.  (a) In this addendum, employees shall provide themselves with and keep in first-class condition a kit of the following tools:

  1. Punch Tool w/110 & 66 Blades
  2. Coax Crimp Tool (RG-59, 62 & 6)
  3. Cat 5 Strippers
  4. Wire Strippers (Miller type)
  5. Utility Knife
  6. Wire Cutters
  7. T & B Sta-Kon tool
  8. Lineman Pliers
  9. Channel Locks (2 pairs)
  10. Flat-Head Screwdrivers (Assorted sizes)
  11. Phillips-Head Screwdrivers (Assorted sizes)
  12. Sheetrock saw (hand type)
  13. Nutdrivers ( ¼” through 7/16” )
  14. Hacksaw
  15. Hammer
  16. Tool Pouch
  17. Volt-Ohm Meter
  18. Tool Box (20” x 8 ½” x 9” minimum with lock)
  19. Scissors
  20. Awl
  21. Flashlight
  22. Tone Generator
  23.  Probe
  24. Tape Measure
  25. Adjustable Wrench
  26. Needle Nose Pliers
  27. Torpedo Level 8”

S & C Apprentice Tool List

The requirements for Apprentices to acquire such tools shall be phased in a manner to be determined by a Labor-Management Subcommittee consisting of two (2) members appointed by the IBEW and two (20 members by NECA.

                                                1st year S & C Apprentice Tool List

  1. Punch Tool w/110 & 66 Blades
  2. Cat 5 Strippers
  3. Wire Strippers (Miller type)
  4. Utility Knife
  5. Wire Cutters
  6. Flat-Head Screwdrivers (Assorted sizes)
  7. Phillips-Head Screwdrivers (Assorted sizes)
  8. Tool Pouch
  9. Scissors
  10. Flashlight
  11. Torpedo Level 8’’
  12. Sheetrock Saw (hand type)
  13. Tape Measure
  14. T & B Sta-Kon tool
  15. Lineman Pliers
  16. Channel Locks (2 pairs)

2nd year S & C Apprentice Tool List

  1. Awl
  2. Tool Box (20” x 8 ½” x 9” minimum with lock)
  3. Nutdrivers ( ¼” through 7/16” )
  4. Hacksaw
  5. Hammer
  6. Adjustable Wrench
  7. Needle Nose Pliers

3rd year S & C Apprentice Tool List

  1. Tone Generator
  2. Prove
  3. Coax Crimp Tool (RG-59, 62 & 6)
  4. Volt-Ohm Meter

(b) In this addendum, no workman shall supply tools other than those listed.  It is the Employer’s responsibility to replace tools lost due to fire or theft with disputes arising over this section to be resolved between the Employer and the Union Representative.

CE/CW Tool List

Appendix “C” – Hours and Working Conditions

Tool List - Employees shall supply the following tools only, once they reach the threshold of Wage Order 16:

Toolbox (tool bag)

Hammer

Knife

Flashlight

Torpedo Level

Toolbox Lock

10” – 12” Crescent Wrench

Lineman Pliers

Wire Strippers

Diagonal Pliers

2 Screw Drivers (Phillips & Straight)

Tape Measure – 25’

2 Pairs of Channel Locks





Page Last Updated: Mar 18, 2024 (10:38:18)
-
Contact Info
IBEW Local 684
519 12th St.
Modesto, CA 95354
  (209)524-5171

Top of Page image
Powered By UnionActive - Copyright © 2024. All Rights Reserved.